Under Edit IP settings, select Automatic (DHCP) or Manual. Choose the network you want to change the settings for, then select Properties.įor an Ethernet network, select Ethernet, then select the Ethernet network you’re connected to. įor a Wi-Fi network, select Wi-Fi > Manage known networks. Select Start, then select Settings > Network & Internet. When you select Manual, you can manually set your IP address settings and DNS server address. When you select Automatic (DHCP), the IP address settings and DNS server address setting are set automatically by your router or other access point (recommended). To specify if you want to use an encrypted (DNS over HTTPS) or unencrypted connection to the DNS server you specify, for Preferred DNS encryption and Alternate DNS encryption, choose the setting you want. To specify an IP address, in the IP address, Subnet prefix length, and Gateway boxes, type the IP address settings. Under Edit network IP settings or Edit IP settings, choose Manual, then turn on IPv6. To specify if you want to use an encrypted (DNS over HTTPS) or unencrypted connection to the DNS server you specify, for Preferred DNS encryption and Alternate DNS encryption, choose the setting you want. To specify a DNS server address, in the Preferred DNS and Alternate DNS boxes, type the addresses of the primary and secondary DNS servers. To specify an IP address, in the IP address, Subnet mask, and Gateway boxes, type the IP address settings. Under Edit network IP settings or Edit IP settings, choose Manual, then turn on IPv4. Under Edit network IP settings or Edit IP settings, select Automatic (DHCP) or Manual. Choose the network for which you want to change the settings.įor an Ethernet network, select Ethernet, then select the Ethernet network you’re connected to. Select Settings > Network & internet.įor a Wi-Fi network, select Wi-Fi > Manage known networks. If ($("#channel_automatic").To enable DHCP or change other TCP/IP settings This seemed odd and intentional, so I dug into the jquery on the modem and found this function event bound to the setting: I am not impressed however that upon investigation it appears you are unable to toggle the `manual` setting as it's grey'd out. I was surprised to find that there is a tool on the modem to do so which is a nice added feature.
I live in a densely populated area, and thus I'm used to having to do an RF scan to find the least occupied channel. Unable to change wireless channel on Model: CGM4140COM Vendor: Technicolor modem (ignite)
0 kommentar(er)
